EMS Mendeleevets - Portable copper-sulphate electrode

Recommended to use at the objects:

Application area

The copper-sulfate electrode for electrometric measurements EMS Mendeleevets is intended for use as a portable reference electrode when measuring the potential difference between an underground construction protected by the cathodic polarization, and ground. The electrode is designed for operation in all climatic conditions with ambient temperature from -5 to +45 °C.

Technical details

Рic. 1. Types of tips:
a – cone;
b – plug

The EMS electrodes are produced of two types: EMS-0,4 – with a short handle (is used as a stationary electrode) and electrode EMS-1,2 – with a full-sized handle (for intensive measurements).

For simplification of a design and convenience of operation the handle of the EMS electrode is made of dural tube ending with a rubber handle.

The measuring wire is brought from the reference electrode to the plug located on the handle under the rubber handle.

in a form of a cone – for measurements in soft grounds (Pic. 1a);
in the form of a flat plug – for measurements in solid grounds (Pic. 1b).

Technical data

Parameter name	EMS-1,2	EMS-0,4
Electrode height, mm	1150±10	400±10
Wire length, m	5,0*	2,0*
Electrode weight, kg, no more than	0,5	0,3
Transient electrical resistance, kOhm, no more than	2
Potential relative to silver chloride electrode, mV	118±10
Service lifetime, years, not less than	3
*Length of the measuring wire is determined by the customer

EMS

Delivery set

Name of items for delivery set	Quantity
The copper-sulfate electrode EMS Mendeleevets, pcs.	1
Measuring wire, pcs.	1
Replaceable tip Cone, pcs.	1
Replaceable tip Plug, pcs	1
Protective cap, pcs.	1
Passport, pcs.	1 per a batch

Conventions


EMS	-	1,2	-	5	Specifications 4318-011-24707490-2014 (instead of Spec. 4318-011-24707490-2005)


					Measuring wire length, m;


					Reference electrode height: 1,2 or 0,4 m;


					Type of the copper-sulfate electrode: EMS Mendeleevets