Manufacturing company «Chemservice» named А.Zorin (CJSC «Chemservice»)
Official site

CORROSION PROTECTION AS AN ART FORM
OFFICIAL SITE OF CHEMSERVICE COMPANY
RELIABLE PROTECTION
OF YUOR EQUIPMENT
IS WORTH OF USING
ВК facebook twitter youtube

Mendeleevets-MTG – deep magnetite anodes

Mendeleevets-MTG
Included in the registers:
Included in the register of GAZPROM Included in the register of TRANSNEFT

Certification:

Certified in the EAC Certified in the INTERGAZCERT Certified in the TRANSNEFT Favourable decision of a Sanitary-hygienic Commission of Experts 100 best products 2018

MT magnetite gain Application area

Deep magnetite groundbeds may be used for installation both in closed holes and in open ones (in such places where there is a static level of ground waters). Besides, this type of groundbeds can be used at reconstruction of overaged deep anode groundbeds (DAG) made from steel pipes.

Installation of magnetite anode groundbeds into the hole is made manually and do not require any additional works.

Gain of magnetite anodes

  1. passing magnetite electrode;
  2. end magnetite electrode;
  3. cable

Technical details

There are two types of magnetite grounding: a chain and a garland.

The chain is five magnetite anodes joined by a connecting cable. The cable goes through the internal cavity of the magnetite electrode and has an electric contact with it. The anodes are at a certain distance from each other. The intercenter distance between the electrodes in a chain is 1,7 or 3,4 m. The general length of the chain is equal to the length of the installation in a hole. Quantity of anodes in a chain may vary from one to five and it is mentioned in the order.

The garland is several chains of anodes in one hole, they are disposed one over another with definite distance which is mentioned in a project. Most often the garland consists of several chains from one magnetite anode.

If magnetite groundbeds are installed into closed boreholes the coke-mineral activator (KMA) must be used to fulfill the hollow space around.

For open holes polymeric perforated pipes are used. The length of the installation in open holes is determined by a season minimal level of ground waters as the electrodes must be placed below the water level. Big advantage of installation in open holes is opportunity to carry out examination, repair and replacement of groundbeds in use.

In the construction of deep magnetite groundbeds a connecting cable is a carrying element of the construction and it is used in the installation of the groundbed into the hole. You can see the schemes of installation of the deep magnetite anodes Mendeleevets-MTG below.

Installation in closed boreholes

Installation in closed boreholes
  1. passing magnetite electrode;
  2. end magnetite electrode;
  3. cable;
  4. drainage aggregate (crushed stone, gravel, etc.);
  5. KMA

Installation in open boreholes

Installation in open boreholes
  1. magnetite electrode;
  2. perforated plastic pipe;
  3. cable;
  4. the ground water level;
  5. centralizer of pipe;
  6. cable from CP station

Technical data

Parameter nameValue
III
Current load, A, no more than:
- when installing in the ground
- when installing in the water environment
3,0*
6,0*
Anodic dissolution rate, kg/(A∙year), no more than 0,3
Dimensions of electrode working surface, mm:
- length (height)
- diameter

620
60

670
60
Assembled anode dimensions , mm, no more than:
- length (height),
- diameter
730
66
780
66
Assembled anode weight, kg, no more than 7,4* 8,0*
Nominal anode weight, kg 5,0* 5,4
Max quantity of groundbeds in a hole, pieces, no more than No limits
Service lifetime, years, no less than 35
*The value is given for a chain of one magnetite anode.
The chain length, the current load and the weight of a groundbed of several magnetite anodes are determined by a number of anodes in a chain.

Delivery set

Quantity of anodes in a set may be changed depending on the order. All consumables needed for the groundbed installation and their connection to the anodic line are included in the delivery set.

Cable captures included into the delivery set are intended for posing groundbeds in the mouth of the hole and the removal of load from a connecting cable.

99